Mesa Boogie MIDI Matrix Amp Controller

Description

Mesa Boogie MIDI Matrix Amp Controller
Mesa Boogie's MIDI Matrix allows you to automate footswitchable functions via MIDI, with an easy to use interface and road-ready design. It connects to your amp via XLR or 1/4" cables, and with up to 250 custom presets, support for latching or momentary operation, relay-based switching, and isolated jacks, the MIDI Matrix has everything you need for high-quality, noise-free use.
Features:
-The MIDI Matrix Amp Controller replaces a MESA/Boogie amplifier's multi-pin DIN/XLR or 1/4" foot-switch and automates foot-switchable functions via MIDI
-3x10 DIP Switch Array and MESA Pre-Configurations eliminate the need for custom cables or dongles to control virtually every MESA/Boogie Amp ever made.
-Stores up to 250 Presets
-Accepts MIDI Program Change and Control Change Messages
-Compatible with all MIDI Foot-Controllers, MIDI capable Multi-Effect Pedals and Pedalboard-based MIDI Loop Switchers
-Illuminated, Instant Access On/Off Buttons
-Eight Switching Functions can be configured for Latching or Momentary, normally open or normally closed switching, and arranged into two linked groups
-Isolated Relays with gold plated, silver alloy, fully sealed contacts for maximum switching compatibility and reliability
-The 8-pin DIN and two 1/4" TRS Switching Jacks are completely isolated, preventing ground loop hum and noise, and allow simultaneous control of up to three amplifiers or products
-Uses an amplifier's existing multi-pin or 1/4" foot-switch cables, standard 1/4" cables, retail 1/4" adapter cables, or a MESA DIN7-to-XLR6 cable (for the Mark IV, Basis M-2000 and Quad Preamp w/ 6-Pin Foot-switch)
-User Data Dump & Load of all User Presets and Configuration Settings via MIDI (with CRC error detection)
-Software updates via MIDI
-Conveniently accepts 9V AC or DC via 2.1mm x 5.5mm barrel plug
-Provides phantom power to MIDI foot-controllers via 7-pin MIDI cable
-Rotatable keyed bottom Mounting Plate for Combo Amp or Effects Rack Installations
Specs:
-Minimum Operating Voltage: 9V DC
-Maximum Operating Voltage: 12V DC
-Maximum Current Draw: 250mA @ 9V DC
-Power Adapter (not included): WARNING!!! To avoid immediate damage and voiding the warranty, the External Power Supply MUST be 9V AC or DC, or maximum 12V DC, with a 2.1mm x 5.5mm Barrel Plug - Accepts Negative or Positive Center DC Polarity
-Dimensions (W x D x H): 5.23"x 4" x 1.59"
-Bottom Mounting Plate, Rotatable (W x D x H): 4.97" x 3.69" x 0.063"
-Weight: 0.9lbs (408.2g)